StereoPi Specifications

From StereoPi Wiki
Revision as of 17:24, 24 April 2019 by Realizator (talk | contribs) (Created page with "Features & Specifications Raspberry Pi Compatibility: Raspberry Pi Compute Module 1 Raspberry Pi Compute Module 3 Raspberry Pi Compute Module 3 Lite Raspberry Pi Compute Modul...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Features & Specifications Raspberry Pi Compatibility: Raspberry Pi Compute Module 1 Raspberry Pi Compute Module 3 Raspberry Pi Compute Module 3 Lite Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash Raspberry Pi Compute Module 3+ Lite Dimensions: width x length: 90 mm x 40 mm height: 23 mm (standard edition) / 15 mm (slim edition) Video: input: two 15-pin CSI-2 camera connectors output: HDMI Camera Support: Raspberry Pi camera V1 (OV5647 sensor) Raspberry Pi camera V2 (Sony IMX 219 sensor) HDMI video capture module (single mode, on Toshiba TC358743XBG chip) Connectivity: GPIO: 40-pin classic Raspberry Pi header USB: 2 x USB Type-A, 1 x USB pin header Ethernet: RJ45 jack Storage: microSD card slot (accessed by Raspberry Pi CM3/3+ Lite) Power: 5 VDC input via two-pin header manual power switch Software: firmware update via Micro USB connector runs standard Raspbian excellent Python support tons of example code

Retrieved from "http://wiki.stereopi.com/index.php?title=StereoPi_Specifications&oldid=254"